-
Experiment 1: Tensile Data
Room-temperature tensile data from as-received Mg ZEK100 sheets, tested in rolling direction (RD, 0°), transverse direction (TD, 90°), 30°, 45° and 60°, at 0.0005/s strain rate -
Compression 200C Mg e-Form Batch-3 (M12_UC-200C)
Compression 200C Mg e-Form Batch-3 (M12_UC-200C) -
Compression RT Mg e-Form Batch-3 (M12_UC-RT)
Compression RT Mg e-Form Batch-3 (M12_UC-RT) -
Shear Testing @ 200C Mg e-Form Batch-3 (M12_SH-200C)
Shear Testing @ 200C Mg e-Form Batch-3 (M12_SH-200C) -
PneumaticBulge 200C Mg e-Form Batch-3 (M12_BBT(PB)-200C)
PneumaticBulge 200C Mg e-Form Batch-3 (M12_BBT(PB)-200C) -
ZEK100 Surface Analysis
SEM and GDOES analysis of ZEK100 Magnesium sheet, as received. -
Shear Testing @ RT Mg e-Form Batch-3 (M12_SH-RT)
Shear Testing @ RT Mg e-Form Batch-3 (M12_SH-RT) -
HydraulicBulge RT Mg e-Form Batch-3 (M12_BBT(HB)-RT)
Hydraulic Bulge RT Mg e-Form Batch-3 (M12_BBT(HB)-RT) -
Plane Strain Testing (for FLC0) at Warm Temperatures of Mg eForm Plus Batch-3...
Plane Strain Testing (for FLC0) at Warm Temperatures of Mg eForm Plus Batch-3 (M12_PST-FLC) -
Mg eForm Plus to Kirksite Heat Transfer Coefficient (M12-Kirksite_HTC)
Mg eForm Plus to Kirksite Heat Transfer Coefficient (M12-Kirksite_HTC) -
Stamping Test Videos
Videos of cross Form Tests were conducted on EFORM+ magnesium sheets at 3 temperatures, 175C, 200C, 225C using 2 lubricants, Fuchs and Quaker, and 2 pre-treatments, Henkel and... -
Final Report
Cross form stamping test was done at different temperatures to assess formability of magnesium using different pretreatments and lubricants. -
FADI-AMT_UniaxialTension RT Mg e-Form Plus Batch-3 (M12_UT-SD-RT)
Uniaxial tension test at room temperature to measure the stress and strain to assess batch-3 Magnesium EFORM Plus Sheets. -
FADI-AMT_UniaxialTension RT Mg e-Form Plus Batch-1 (M15_UT-SD-RT)
Uniaxial tension test at room temperature to measure the stress and strain to assess batch-1 Magnesium EFORM Plus Sheets. -
FADI-AMT_UniaxialTension 200C Mg e-Form Plus Batch-1 (M15_UT-SD-200C)
Uniaxial tension test at 200C to measure the stress and strain to compare the batch-1 Magnesium EFORM Plus Sheets. -
FADI-AMT_UniaxialTension 200C Mg e-Form Plus Batch-3 (M12_UT-SD-200C)
Uniaxial tension test at 200C to measure the stress and strain to assess batch-3 Magnesium EFORM Plus Sheets. -
Erichsen Testing Data
Load-displacement data with notes. Conducted forming cup test with magnesium sheets at different temperatures to assess formability of different lubricants and pretreatments.