-
Forming Window Data
Forming Window Data -
Thermocouple Testing Data
Thermocouple Data from set up testing -
ARGUS data
Dynain files -
Summary of numerical problems during mesh regularization for MAT233 calibration
Document explains the various numerical problems that were encountered during mesh regularization and calibration of MAT233 -
Simulations of various strain paths with crystal plasticity for Batch_ONE
Crystal plasticity simulations (for Batch_ONE at 200oC) of: - Balanced biaxial tension - Uniaxial compression along RD - Plane strain tension along RD and TD - Simple shear... -
Simulations of various strain paths with crystal plasticity for Batch_THREE
Crystal plasticity simulations (for Batch_THREE at 200oC) of: - Balanced biaxial tension - Uniaxial compression along RD - Plane strain tension along RD - Simple shear along RD... -
MAT233 for Batch_ONE
MAT233 material cards calibrated for Batch_ONE material at 150oC, 200oC and 250oC for 0.1s-1 and 0.5 s-1 strain rates. Mesh regularization performed for 6mm, 3mm and 1.5mm mesh... -
MAT233 for Batch_THREE
MAT233 material cards calibrated for Batch_THREE material at 200oC and 0.1s-1. Mesh regularization is performed for 6mm, 4mm and 2mm mesh sizes. -
FLDs for Batch3 @ 200oC with and without pre-strain
FLD simulations with crystals plasticity -
FLDs for Batch1 @ 150oC, 200oC and 250oC
FLD predictions with crystal plasticity -
Compression of Mg - 0.1Ca - 0.5Zn (wt.%) at 200C - 10-1, 10-2, 10-3 s-1
Compression testing was performed using an Instron 5582 universal testing system on cylindrical samples of Mg – 0.1Ca - 0.5Zn, measuring 16 mm in diameter and 24 mm in height... -
Experiment 1: Tensile Data
Room-temperature tensile data from as-received Mg ZEK100 sheets, tested in rolling direction (RD, 0°), transverse direction (TD, 90°), 30°, 45° and 60°, at 0.0005/s strain rate -
Compression 200C Mg e-Form Batch-3 (M12_UC-200C)
Compression 200C Mg e-Form Batch-3 (M12_UC-200C) -
Compression RT Mg e-Form Batch-3 (M12_UC-RT)
Compression RT Mg e-Form Batch-3 (M12_UC-RT) -
Shear Testing @ 200C Mg e-Form Batch-3 (M12_SH-200C)
Shear Testing @ 200C Mg e-Form Batch-3 (M12_SH-200C) -
Lap Shear Strength Testing EFP Batch 2 PT D
Tested lap shear strength to evaluate possible adhesion weaknesses resulting from applying pretreatment D. -
Corrosion Test Structural Adhesive Over EFP Batch 3 PT D
E-Form Plus lap shear coupons were e-coated (BASF Cathogard 800) and tested in ASTM B117-19 “Salt Fog” (3) environment for 30 days, to evaluate for weakness in corrosion... -
Henkel D v Xtalic Humidity Test
E-form Plus with Henkel pre-treatment “D” was tested side by side with a Zn treatment produced by Xtalic, and electrogalvanized steel panels (ACT), as a control, in a modified... -
Lap Shear Strength Testing EFP Batch 2 PT C
Lap Shear Strength Testing comparing control (as received-Solvent cleaned only) with E-Form plus pretreated with Henkel pretreatment Process C.