-
Uniaxial Tension Testing and FLC Testing at 200C and Three Strain Rates of Mg...
This dataset has no description
-
Dynamic recrystallization, texture, and grain growth + texture and formability
Electron backscatter diffraction (EBSD) was used to study the texture and microstructure unalloyed Mg, Mg-Ca binaries, and Mg-Zn-Ca ternary alloys subjected to plane strain... -
Compression Mg - 0.35Ca (wt.%) at 250C - 10 - 3, 10 -2 and 10 -1
One of the factors related to solutes effect on texture is dynamic strain aging (DSA) which is observed as serrations in stress - strain curves during compression at high... -
Plane Strain Testing (for FLC0) at Warm Temperatures of Mg eForm Plus Batch-1
Plane Strain Testing (for FLC0) at Warm Temperatures of Mg eForm Plus Batch-1 -
Stability and Cleanability of DOE formulas on E-form PLUS with Henkel pre-tre...
Connected to the Twist Compression Data for the DOE set on E-form PLUS with pre-treatment D; in addition to lubrication testing samples were evaluate for neat product stability... -
Corrosion and Cleanability of Quakerdraw 450 MAG on E-form PLUS with Henkel p...
Results of corrosion, cleanability, and varnishing testing of Quakerdraw 450 MAG (formerly Formula 4C) on E-form PLUS magnesium alloy with Henkel pre-treatment C. -
TCT on E-form PLUS at 250C
Twist Compression Test (TCT) data on E-form PLUS magnesium alloy at 250C. Includes bare E-form PLUS, Henkel pre-treatment C, and Henkel Pre-treatment D -
TCT Data on E-form PLUS at 100C
Twist Compression Test lubrication data performed on E-form PLUS, bare and with Henkel pre-treatment C -
TCT on ZEK100 at 250C
Testing of the lubrication performance by Twist Compression Test (TCT) on ZEK100 at 250C. -
TCT round 1 100C
Lubricant formula screening on ZEK100 Mg Alloy at 100C -
Report 5 - Coefficient of Friction at various temperatures
Summary of the Coefficient of Friction for magnesium at various temperatures with lubricants -
Initial TGA Screening for Temperature Stability
Thermogravimetric (TGA) analysis of initial formulas screened for thermal stability up to 350C. -
Compression 200C Mg e-Form Batch-3 (M12_UC-200C)
Compression 200C Mg e-Form Batch-3 (M12_UC-200C) -
Compression RT Mg e-Form Batch-3 (M12_UC-RT)
Compression RT Mg e-Form Batch-3 (M12_UC-RT) -
Shear Testing @ 200C Mg e-Form Batch-3 (M12_SH-200C)
Shear Testing @ 200C Mg e-Form Batch-3 (M12_SH-200C) -
PneumaticBulge 200C Mg e-Form Batch-3 (M12_BBT(PB)-200C)
PneumaticBulge 200C Mg e-Form Batch-3 (M12_BBT(PB)-200C) -
ZEK100 Surface Analysis
SEM and GDOES analysis of ZEK100 Magnesium sheet, as received. -
Shear Testing @ RT Mg e-Form Batch-3 (M12_SH-RT)
Shear Testing @ RT Mg e-Form Batch-3 (M12_SH-RT) -
HydraulicBulge RT Mg e-Form Batch-3 (M12_BBT(HB)-RT)
Hydraulic Bulge RT Mg e-Form Batch-3 (M12_BBT(HB)-RT) -
Plane Strain Testing (for FLC0) at Warm Temperatures of Mg eForm Plus Batch-3...
Plane Strain Testing (for FLC0) at Warm Temperatures of Mg eForm Plus Batch-3 (M12_PST-FLC)