-
Crystal plasticity-based simulation of cross-forming
Simulations of cross-forming with crystal plasticity for EFORM+ Batch#1 at constant temperature and strain rate (200C, 0.01s-1) -
E-Form Plus Tensile Test Data
Dataset containing results of the temperature and strain-rate variations of the tensile test in three in-plane orientations. -
Input for Material Card 233+
This file is the inout deck for Material Card 233+ that is calibrated for Batch 1 at 200oC and 0.1s-1. -
Summary of numerical problems during mesh regularization for MAT233 calibration
Document explains the various numerical problems that were encountered during mesh regularization and calibration of MAT233 -
Simulations of various strain paths with crystal plasticity for Batch_ONE
Crystal plasticity simulations (for Batch_ONE at 200oC) of: - Balanced biaxial tension - Uniaxial compression along RD - Plane strain tension along RD and TD - Simple shear... -
Simulations of various strain paths with crystal plasticity for Batch_THREE
Crystal plasticity simulations (for Batch_THREE at 200oC) of: - Balanced biaxial tension - Uniaxial compression along RD - Plane strain tension along RD - Simple shear along RD... -
MAT233 for Batch_ONE
MAT233 material cards calibrated for Batch_ONE material at 150oC, 200oC and 250oC for 0.1s-1 and 0.5 s-1 strain rates. Mesh regularization performed for 6mm, 3mm and 1.5mm mesh... -
MAT233 for Batch_THREE
MAT233 material cards calibrated for Batch_THREE material at 200oC and 0.1s-1. Mesh regularization is performed for 6mm, 4mm and 2mm mesh sizes. -
FLDs for Batch3 @ 200oC with and without pre-strain
FLD simulations with crystals plasticity -
FLDs for Batch1 @ 150oC, 200oC and 250oC
FLD predictions with crystal plasticity