-
TEM/STEM characterization of Alloy 2 plus after T4
TEM/STEM characterization of Alloy 2 plus after T4 treatment. -
optical micrographs of Alloy 2 plus as-cast condition and after H480 homogeni...
characterization of Alloy 2 plus as-cast condition microstructure and microstructure after H480 homogenization -
EBSD characterization of Alloy 2 plus T4 condition
EBSD characterization of Alloy 2 plus T4 condition -
STEM-EDS characterization of Alloy 2 plus microstructure after T4 treatment
STEM-EDS characterization of Alloy 2 plus microstructure after T4 treatment -
STEM characterization of Alloy 2 plus microstructure after T6 treatment
STEM characterization of Alloy 2 plus microstructure after T6 treatment -
Mixing enthalpy of various equiatomic pairs in Mg (hcp) matrix
Calculation of mixing enthalpy of various equiatomic pairs in Mg (hcp) matrix -
Diffusion modeling of solutes in Alloy 2 plus
Diffusion modeling of solutes Al, Zn, Ca, Ce and Mn in Mg (hcp) using DICTRA software -
CALPHAD prediction of solidification microstructure
CALPHAD prediction of solidification microstructure and optimized thermomechanical processes for producing ZAXME11100 sheet alloy -
STEM characterization of Alloy 2 microstructure after annealing at 350C for 1...
STEM characterization of Alloy 2 microstructure after annealing at 350C for 10 minutes -
STEM-EDS characterization of as-rolled Alloy 2 microstructure
STEM-EDS mapping of as-rolled Alloy 2 microstructure -
TEM/STEM characterization of as-rolled Alloy 2 microstructure
characterization of as-rolled Alloy 2 microstructure using transmission electron microscopy and scanning transmission electron microscopy -
EBSD characterization of annealed Alloy 2 microstructure
EBSD characterization of Alloy 2 (ZXEM2000) after annealing at 350 °C for 10 minutes. -
EBSD characterization of As-rolled Alloy 2 (ZXEM2000) microstructure
EBSD characterization results of As-rolled Alloy 2 (ZXEM2000) microstructure -
E-Form Plus Tensile Test Data
Dataset containing results of the temperature and strain-rate variations of the tensile test in three in-plane orientations. -
Final summary report
Summary of Fuchs Lubricants Company's development work for a lubricant to facilitate warm forming of low cost magnesium sheet metal into automotive body parts (closures).... -
Dynamic recrystallization, texture, and grain growth + texture and formability
Electron backscatter diffraction (EBSD) was used to study the texture and microstructure unalloyed Mg, Mg-Ca binaries, and Mg-Zn-Ca ternary alloys subjected to plane strain... -
Input for Material Card 233+
This file is the inout deck for Material Card 233+ that is calibrated for Batch 1 at 200oC and 0.1s-1. -
Technical Cost Model Results for Steel vs Mg Door Designs by Camanoe
Camanoe technical cost model comparing Mg door design to baseline steel door design. Includes cost drivers and sensitivity analysis. Mg door model is E-Form Plus with... -
Arplas Optimized Process Parameters
Data are Arplas experimentally optimized process parameters -
Mg Bulk Resistivity Comparisons to Al and Steel
Data are bulk resistance measurements (resistivity is calculated from resistance) from ZEK100 and AZ21 compared to Al and steel.